Make sure the tail pipe is cool before polishing the tail pipe finishers. Failure to do so may result in personal injury.
To prevent damage to the vehicle when using a valeting service, make sure to advise them of the cleaning instructions contained within the Owner's Handbook.
Following cleaning of the vehicle's exterior, it is recommended that the vehicle is taken for a short drive, in order to dry out the brakes. A short drive, in order to dry out the brakes, is especially recommended if a pressure washer is used.
Remove any heavy deposits of mud and dirt with a hose, before washing the vehicle.
Some high pressure cleaning systems are sufficiently powerful to penetrate door and window seals, and damage trim, door locks and door handles. Never aim the water jet directly at the engine air intake, heater air intakes, radiator cooling fins, body seals, cameras, or at any components which may be damaged.
Do not use a power wash system in the engine bay area, or directed at door handles.
Substances which are corrosive, such as bird droppings, can damage the vehicle’s paintwork and should be removed as soon as possible.
Make sure to read and comply with all warnings and product instructions supplied with any cleaning products.
Never use cleaning products which are not approved for use on vehicles.
Do not apply polish to any unpainted areas of bumper mouldings. It will become ingrained in the textured finish.
To avoid damage to the bonnet, do not lift the wipers when they are in the normal parked position. See WIPERS SERVICE POSITION.
After washing the vehicle, it is recommended to use a suitable metal polish on stainless steel or chrome finishers to restore the surface appearance.
Do not aim the water jet directly at any rubber gaiters or seals on suspension joints.
Make sure that the water jet nozzle is more than 300 mm away from vehicle components.
The vehicle manufacturer recommends the use of specialised satin paint products when cleaning the vehicle’s exterior. Any other cleaning or paint protection product may have an adverse effect on the paint finish.
Never polish vehicles that have a satin matte paint finish. Polishing causes the finish to shine and may reduce the matte effect.
Do not use an automated car wash.
Stickers, films, magnetic plates, or similar should not be affixed to the vehicle’s exterior.
Additional care is required when cleaning the exterior of vehicles with a satin matte paint finish. It is recommended to wash the vehicle by hand, using a soft sponge, making sure not to apply high pressure to the paint surface. Avoid washing the vehicle in direct sunlight.
Remove any of the following substances immediately, where possible: