ADAPTIVE SPEED LIMITER [G2390371]

WARNING:

Make sure the relevant safety warnings have been read and understood before driving the vehicle. See SPEED LIMITER SAFETY.

NOTE:

The adaptive speed limiter does not operate if the traffic sign recognition system is not operating. See TRAFFIC SIGN RECOGNITION.

The speed limiter controls are located on the right side of the steering wheel:

  1. Speed control switch and RES button:
    1. Move the switch upward to select SET+.
    2. Move the switch downward to select SET-.
    3. Press the button to select RES.
  2. CAN cancel button.
  3. LIM button.

Press the LIM button (3) to toggle between adaptive speed limiter and cruise control. The instrument panel displays the information lamp for the selected system. See SPEED LIMITER (GREEN), ADAPTIVE SPEED LIMITER (GREEN), and CRUISE CONTROL (GREEN).

The LIM icon on the steering wheel controls illuminates to confirm that the system is operational.

If the speed limiter information lamp is displayed, press and hold the CAN button (2). The adaptive speed limiter information lamp replaces the speed limiter information lamp to confirm that the adaptive speed limiter has been selected.

The adaptive speed limiter does not operate until activated. Move the speed control switch (1) to the SET+ position and release, or press the RES button (1) to activate the adaptive speed limiter. The Head-Up Display (HUD) and instrument panel display the detected speed limits as icons.

If the system detects a speed limit lower than the current vehicle speed, it automatically slows the vehicle to meet the speed limit. Press the RES button switch to increase the rate of deceleration.

If the system detects a speed limit higher than the current vehicle speed, it allows the driver to accelerate up to the speed limit. Press the RES button to increase the rate of acceleration.

NOTE:

The adaptive speed limiter only activates if the vehicle's speed is less than 30 km/h (20 mph) over the set speed. If the vehicle's speed is 30 km/h (20 mph) above the set speed, the instrument panel displays a warning message and the system does not activate.

Press the CAN button to suspend adaptive speed limiter operation.

Press the RES button, or move the speed control switch to the SET+ position and release, to resume adaptive speed limiter operation.

The adaptive speed limiter's detected speed limit can be overridden if rapid acceleration is required. Fully press the accelerator pedal to accelerate past the adaptive speed limiter's set speed. When the vehicle's speed drops below the adaptive speed limiter's detected speed limit, any speed limitations are reapplied.

The system's detected speed limit can be adjusted, if required, to control the vehicle’s speed at just above or below the detected speed limit. The maximum adjustment is 10 km/h (5 mph) above or below the detected speed limit

Move the speed control switch upwards to the SET+ position to increase the vehicle’s speed limit:

  1. A single movement of the switch increases the vehicle’s speed limit by 2 km/h (1 mph).
  2. Hold the speed control switch in the SET+ position to increase the vehicle’s speed limit by 10 km/h (5 mph).

Move speed control switch downward to the SET- position to reduce the vehicle’s speed limit.

  1. A single movement of the switch reduces the vehicle’s speed limit by 2 km/h (1 mph).
  2. Hold the speed control switch in the SET- position to reduce the vehicle’s speed limit by 10 km/h (5 mph).
NOTE:

Any adjustments to the adaptive speed limiter's detected speed limit are lost if the speed limiter is activated. Adjustments are also lost if the vehicle’s ignition is switched off.