CONNECTING A STARTING AID [G2782701]

CAUTION:

Make sure to use the correct type and rating of starting aid compatible with a Lithium-ion (Li-ion) LiFePO4 battery. Using an unsuitable starting aid may damage the battery or potentially result in damage to the vehicle. Refer to the label near the vehicle's positive jump start point terminal. If in any doubt consult a retailer/authorised repairer or a qualified person.

The above label identifies that a Li-ion battery is fitted to the vehicle.

NOTE:

The information on the label displays the maximum voltage that should be applied at the jump start terminals when attempting to jump start the vehicle.

NOTE:

The information on the label displays the maximum voltage and current that should be applied at the jump start terminals when charging the 12V battery.

  1. Disabled vehicle.
  2. Starting aid, or a slave battery.

To start the vehicle using a starting aid or a slave battery compatible with a Li-ion battery, follow the instructions in the sequence given:

  1. Connect the positive (red) jump lead to the vehicle's positive (+) jump start terminal, as illustrated.
  2. Connect the negative (black) jump lead to the vehicle's negative (-) jump start terminal, as illustrated.
  3. Switch on the starting aid.
  4. Start the engine. Allow it to idle.
  5. Disconnect the negative (black) jump lead from the vehicle's (-) jump start terminal.
  6. Switch off the starting aid.
  7. Disconnect the positive (red) jump lead from the vehicle's (+) jump start terminal.