HEADPHONE PAIRING AND RESET [G2791902]

The headphones supplied with the vehicle can pair with up to eight devices. The first device paired with the headphones becomes the default and automatically connects when the headphones and device are powered on. Connecting to a device other than the default must be done via manual pairing.

To change the default device, perform a factory reset or clear the paired list on the device.

To manually pair the headphones supplied with the vehicle:

1. Power on the headphones.
2. Press and hold the power button for approximately 5 seconds, the headphones are now discoverable. A tone sounds accompanied by the LED status indicator. See HEADPHONE CHARGING AND STATUS
3. Use the devices Bluetooth connection to search for the headphones and follow the device instructions to pair. To pair with the vehicle, follow the instructions on pairing via the touchscreen. See PAIRING AND CONNECTING USING THE TOUCHSCREEN
4. A tone sounds when pairing is complete.
   NOTE:

   The device not found tone sounds if pairing times out.

To reset the default device and check status:

1. Press the power button for 3 seconds, release the button when the LED indicator flashes red.
2. Check the status of the LED indicator:
   1. If the LED flashes red and blue, a default device is not stored.
   2. If the LED flashes blue, a default device is stored.
3. To clear a stored device, press and hold the volume + and - buttons until the headphones power off.