Make sure the relevant cautions have been read and fully understood before using the wipers. See WIPER CARE POINTS.
The windscreen wipers do not operate when the bonnet is open.
The rear wiper does not operate when the tailgate is open.
The rear wiper automatically operates if the windscreen wipers are operating and Reverse (R) is selected.
Move the control upward to position (1) to select windscreen intermittent wipe. Rotate the collar (5) between the MIN and MAX marks to adjust the time delay between wipes. As the collar is rotated towards the MAX mark wipe frequency increases.
Wipe frequency automatically increases with vehicle speed.
Move the control upward to position (2) to select windscreen low speed continuous wipe.
Move the control upward to position (3) to select windscreen high speed continuous wipe.
Move the control downward to position (4), and release, for a single wipe of the windscreen. Hold in the downward position for additional wipes.
Pull the control forward to position (6), and release, to operate the windscreen wash wipe function. Hold the control in the forward position if more washer fluid is required. A drip wipe function clears any residual washer fluid from the windscreen. See DRIP WIPE.
Rotate the end of the control to the INT position (7) to select rear screen intermittent wipe.
Wipe frequency automatically increases with vehicle speed.
Rotate the end of the control to the ON position (8) to select rear screen continuous wipe.
Press and release the end of the control to operate the rear screen wash wipe function. Press and hold the end of the control if more washer fluid is required. The wiper continues to operate for a number of cycles after the end of the control is released.