TOOL KIT [G3139138]

WARNING:

Make sure the relevant safety warnings have been read and understood before using the tool kit. See WHEEL CHANGING SAFETY.

NOTE:

Tool types and positions may vary from the illustration.

NOTE:

Take careful note of the storage position for each tool, as it is important to return the tools to their correct position after use.

The tool kit is stored behind a panel under the loadspace floor panel.

The tool kit consists of the following:

  1. Jack assembly.
  2. Towing eye.
  3. Wheel bolt cover removal tool.
  4. Wheel guide pin.

The jack assembly consists of the following:

  1. Jack: Observe the instructions printed on the jack.
  2. Wheel brace.
  3. Jack handle.
NOTE:

Examine the jack occasionally. Clean and grease the moving parts, particularly the screw thread, to prevent corrosion.

To access the tool kit:

  1. Remove the spare wheel. See REMOVING THE SPARE WHEEL.
  2. Carefully reposition the panel to allow access.
  3. Release the securing strap.
Locking wheel bolt adaptor

The locking wheel bolt adaptor is stored under the loadspace floor panel.

NOTE:

Tool types and positions may vary from the illustration.

NOTE:

Take careful note of the storage position for each tool, as it is important to return the tools to their correct position after use.