PANORAMIC ROOF BLIND RESET [G3182022]

NOTE:

The following procedure also resets the panoramic roof.

The roof blind needs to be reset if the battery is disconnected, becomes discharged, or the power supply is interrupted. The reset procedure is as follows:

  1. Start the engine.
  2. Press the roof close switch firmly and hold for approximately 20 seconds. The roof/blind will make an audible click.
  3. Continue to keep the switch pressed.
  4. The roof blind and roof opening panel will both fully close, then carry out a full open and close cycle. Release the switch once movement is complete.

The panoramic roof/blind can now be operated as normal.