TOOL KIT [G2740129]

WARNING:

Make sure the relevant safety warnings have been read and understood before using the tool kit. See WHEEL CHANGING SAFETY.

NOTE:

Tool types and positions may vary from the illustration.

NOTE:

Take careful note of the storage position for each tool, as it is important to return the tools to their correct position after use.

Vehicles with a versatile loadspace floor: The versatile loadspace floor needs to be adjusted or removed to access the tool kit. See VERSATILE LOADSPACE FLOOR.

5 seat vehicles

The tool kit is stored behind a panel under the loadspace floor panel.

The tool kit consists of the following:

  1. Jack assembly.
  2. Towing eye.
  3. Lug bolt cover removal tool.
  4. Wheel guide pin.

The jack assembly consists of the following:

  1. Jack: Observe the instructions printed on the jack.
  2. Lug wrench.
  3. Jack handle.
NOTE:

Examine the jack occasionally. Clean and grease the moving parts, particularly the screw thread, to prevent corrosion.

To access the tool kit:

  1. Remove the spare wheel. See REMOVING THE SPARE WHEEL.
  2. Carefully reposition the panel to allow access.
  3. Release the securing strap.
7 seat vehicles

The tool kit is stored under the loadspace floor panel.

The tool kit consists of the following:

  1. Towing eye.
  2. Lug bolt cover removal tool.
Locking lug bolt adapter

The locking lug bolt adapter is stored under the loadspace floor panel.

NOTE:

Tool types and positions may vary from the illustration.

NOTE:

Take careful note of the storage position for each tool, as it is important to return the tools to their correct position after use.