LUGGAGE DIVIDER [G2789079]

The versatile loadspace floor system provides various means of retaining luggage. Use the pull loops to move the floor panels up or down as required.

Use the pull loop (1) to raise the versatile loadspace floor lid to access the storage compartment. The versatile loadspace floor lid (2) locks into position. To release, press the catches located on the sides of the versatile loadspace floor lid (3).

Use the middle pull loop (1) to deploy the partition (2). The partition locks into position (3) as shown. To fold, release the locating pegs (3) and fold down.

Move the sliders left and right to expose different lengths of elastic for retaining different sized cargo.

If the pull loop becomes trapped, an emergency release is located as shown. Push the tab (2) to release the versatile loadspace floor panel (1).

When using the lower tailgate as a seat, the versatile loadspace floor can be positioned to provide a backrest. See below.

To access the premium cushions:

1. Pull the storage area tab upwards.
2. Lift the storage area lid to reveal the cushions.
3. Remove the cushions.

To fit the cushions:

1. Pull the backrest tab upwards.
2. Move the backrest towards the rear of the car until it latches into position.
3. Fit the upper cushions on the top of the backrest.
4. Fit the lower cushions as shown.

Removal and stowage of the cushions is the reverse of the above procedures.