CLOSING VEHICLE SENSING LIMITATIONS [G2792508]

The closing vehicle sensing system does not operate when:

  1. Reverse (R) or Park (P) is selected.
  2. The vehicle's speed is below 6 mph (10 km/h).
  3. The sensors become blocked.
  4. The blind spot monitor system is not operating.
  5. The vehicle is traveling around a tight bend.
  6. An electrical connector is connected to a Jaguar Land Rover approved trailer socket.
CAUTION:

The closing vehicle sensing system remains disabled if a trailer is disconnected from the trailer socket while the vehicle is still running. Switch the vehicle's electrical system off, then back on again, to enable the closing vehicle sensing system. Failure to do so could increase the risk of collision during a vehicle maneuver.

The closing vehicle sensing system:

  1. Works most effectively on multi-lane highways.
  2. Monitors an area of approximately 11 ft (3.3 m) from the side of the vehicle, and approximately 230 ft (70 m) behind the vehicle.
  3. May register false targets if traveling along a narrow lane.
  4. Does not work accurately if the sensors are misaligned due to bumper modifications or impact damage.