Make sure the relevant safety warnings have been read and understood before checking and adjusting the tire pressures. See TIRE PRESSURE SAFETY.
For vehicles with Tire Pressure Monitoring System (TPMS), inflate the tires to the advised pressures displayed, in brackets, in the instrument panel. See TIRE PRESSURE CHECK.
Confirm that the TPMS is set for the correct vehicle loading. See VEHICLE LOADING.
When the tires are cold, inflate to the recommended cold tire pressures if either of the following conditions apply:
See TIRE PRESSURE LABEL or refer to the table below.
To avoid damaging the valves, do not apply excessive force or sideways pressure on the gauge and/or inflator.
To avoid damage to the TPMS valves, it is recommended not to use rigid tire inflation wands. Rigid tire inflation wands increase the risk of excess leverage and sideways pressure on the valve.
The following procedure should be used to adjust the tire pressures:
If the tire pressure is too high, remove the gauge and press the center of the valve to allow air out of the tire. Refit the gauge to the valve and check the pressure.
Tire size | Light load | Normal load | ||
---|---|---|---|---|
Front psi (bar, kPa) | Rear psi (bar, kPa) | Front psi (bar, kPa) | Rear psi (bar, kPa) |
|
255/60R20 113Y | 34 (2.3, 230) | 37 (2.5, 250) | 44 (3.0, 300) | 50 (3.4, 340) |
275/55R20 117W | 34 (2.3, 230) | 37 (2.5, 250) | 44 (3.0, 300) | 50 (3.4, 340) |
275/55R20 117Y | 34 (2.3, 230) | 37 (2.5, 250) | 44 (3.0, 300) | 50 (3.4, 340) |
275/50R21 113Y | 34 (2.3, 230) | 37 (2.5, 250) | 44 (3.0, 300) | 50 (3.4, 340) |
285/45R22 114Y | 34 (2.3, 230) | 37 (2.5, 250) | 44 (3.0, 300) | 50 (3.4, 340) |
285/40R23 111Y | 34 (2.3, 230) | 37 (2.5, 250) | 44 (3.0, 300) | 50 (3.4, 340) |
T195/75R20 116M | 60 (4.2, 420) | 60 (4.2, 420) | 60 (4.2, 420) | 60 (4.2, 420) |
For the latest available information on the tire pressures visit: www.ownerinfo.landrover.com.