CONNECTING A STARTING AID [G1660672]

WARNING:

Do not connect the starting aid to any battery terminal on your vehicle. Doing so may cause a spark, which can result in an explosion. It may also result in damage to the charging system.

Open the bonnet, locate the engine compartment front fuse box and release the 2 covers to access the positive boost point terminal. See BRANCHER LES CÂBLES VOLANTS.

To start the vehicle using a starting aid, follow the procedure below:

  1. Connect the positive (Red) cable to the vehicle's (under bonnet) positive boost point terminal.
  2. Connect the negative (Black) cable to the vehicle's (under-bonnet) negative boost point terminal.
  3. Connect/switch on the starting aid.
  4. Start the engine and allow it to idle for a few minutes.
  5. Disconnect/switch off the starting aid.
  6. Disconnect the negative (Black) cable from the vehicle.
  7. Disconnect the positive (Red) cable from the vehicle.

Refit the positive boost point terminal access covers and close the bonnet.